Official KalabuMalami

Bagaimana cara nak buat siaran langsung untuk ke internet event dari tempat aku ni. Apakah peralatan yang diperlukan dan apakah Software yang mesti ada...maksudnya disini dari handycam ke terus masuk boardcast..streaming live video ...

Di sini aku buat rujukan untuk digunakan pada masa akan datang..

Items Needed:
Video Camera with Firewire
Windows PC with Firewire
Windows Media Encoder 9 (free)

Optional:
External Microphone
Windows Media Services

Before starting you will need to figure out where you will host your stream. Windows Media Encoder can host up to four streams which is about the max most home/office Internet connections can handle. To support more clients, we use a dedicated Windows server running Windows Media Services on a 100 Mb connection at ServerBeach. Other options are services such as Christian Video Channel, VitalStream or ChurchQuest (plans start at $8.95/month).

If you will be hosting on your own, make sure you have sufficient upstream bandwidth. We usually run a 387 Kbps stream, which with a 2 Mbit upstream you could serve 4 to 5 clients. (There is quite a bit of overhead due to buffering, etc.) Also, you will have to open a few ports on your firewall.

For this example we will be using our dedicated windows server.

1. Connect video camera to PC via firewire, Windows XP should automatically detect it.

2. Fire up Windows Media Encoder, the new session wizard should pop, select the “Broadcast a live event” wizard.

3. Under Device Options, select your video camera for both the video and audio (unless you are using an external mic connected to the sound card).

4. We will push to our Windows Media server, this avoids opening inbound ports on the firewall.

5. Server and Publishing Point
Server Name: DNS or IP address of server running Windows Media Services
Publishing Point: Choose a name for your stream (does not need to already exist)

6. Under Encoding Options we chose the default setting of 387 Kbps under “Live Broadcast video”

7. We usually don’t archive the file using the streaming box because of the reduced quality (recording quality is based on the Encoding Options we just chose), we just slide a tape into the camcorder.

8. We don’t include any videos for an intro or conclusion, but you can easily do so.

9. Add in all the relevant information about your stream.

10. Review the settings and click finish.

11. You will be prompted for a user name and password, enter an account that will allow you to create/manage publishing points on the streaming server.

12. Start Encoding

13. Tell your users to point their web browsers to http://servername/publishingpoint

References : http://anchorite.org/blog/2007/01/25/live-windows-media-streaming-mini-howto/